A Tilehurst company - serving Sacramento, CA

Tamko Roofing Company Nationwide

Tile roofingTile roofing
Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

Tamko Roofing Company in Sacramento: What to Know First

We’re an independent Tamko roofing company in Sacramento, meaning we install, repair, and replace Tamko shingle systems without being tied to the manufacturer’s corporate network. Most Tamko roof repairs in Sacramento run $425 – $1,850 depending on the failure, and we give you that number in writing before a single shingle comes off the decking. Greg Holloway walks every job personally, which means the price we quote is the price you pay.

Call (279) 348-3049

This page is for Sacramento homeowners who already have a Tamko roof and want straight answers about how it fails, what it costs to fix, and whether repair or replacement makes more sense. Call (279) 348-3049 and a live person answers, day or night. No voicemail, no waiting until Monday.

How Tamko Products Fail – and How We Fix Them

Tamko makes solid shingles, but Sacramento’s climate punishes every brand differently. Here’s what we see on Tamko roofs across town, from Natomas to Land Park to the tree-heavy streets of Curtis Park.

  • Heritage series granule loss on south-facing slopes. Tamko Heritage architectural shingles carry a heavier granule load than some competitors, but 100-degree summers bake the asphalt layer underneath and cause premature granule shedding on slopes that face direct afternoon sun. The telltale sign is a patch of shingles that looks “bald” while the rest of the roof still has texture. We replace those shingles individually rather than tearing off the whole slope, because the surrounding shingles usually have years left. This saves Sacramento homeowners thousands over a full replacement.
  • Elite Glass-Seal sealant strip failures in oak-heavy neighborhoods. Tamko Elite shingles rely on a heat-activated sealant strip to lock each course in place. In neighborhoods with heavy oak canopy, leaf litter traps moisture against the shingle surface and prevents proper thermal bonding. We see lifted shingle tabs after wind events on roofs that are only 8 to 12 years old in pockets like East Sacramento and the Fab Forties. The fix is mechanical reinforcement: we reseat the tabs and add adhesive where the original seal lost hold.
  • Titan XT nail-line telegraphing on older decking. Tamko Titan XT is a thicker, heavier shingle. When it’s installed over older 3/8-inch plywood or spaced plank decking, the nails don’t fully seat and eventually telegraph through as visible bumps along the course lines. This isn’t a Tamko manufacturing defect, it’s an installation issue tied to decking prep. On our repair jobs, we pull the affected shingles, inspect the decking, and resecure with proper fasteners before reinstalling.
  • StormRunner ridge cap separation along hips and ridges. Tamko’s StormRunner accessory line includes pre-cut ridge caps that cap the peaks. Sacramento’s freeze-thaw cycles are mild compared to the Sierra foothills, but the expansion and contraction still works on ridge cap adhesive over 15-plus years. We frequently find ridge caps that have lifted or slid out of alignment, especially on homes in older neighborhoods like Boulevard Park with classic hip-roof designs. The repair means pulling the loose caps, checking the ridge vent or ridge board underneath, and reinstalling with fresh sealant.
  • Flashing failures where Tamko shingles meet stucco chimneys and vent pipes. Every shingle brand fails first where two materials meet, not in the field of the roof. On Sacramento Tamko installs, we routinely find step flashing that was never properly overlapped with the shingle course, or pipe collars that cracked due to UV exposure. These leaks look like “shingle failure” to the homeowner but they’re almost always at the transition point. We fix the flashing, replace only the damaged shingles around it, and verify the repair with a water test before we leave.
Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Our Tamko Roofing Company Process

Every Tamko job we run follows the same sequence. It’s not complicated, but the order matters.

  1. 1
    You call, a person answers. We take your address, listen to what you’re seeing (granules in the gutter, a ceiling stain, shingles in the yard after wind), and schedule a visit. We give you a two-hour arrival window.
  2. 2
    Greg walks the roof. He’s on the roof himself, not sending a sales rep to take photos from the driveway. He checks the Tamko shingle condition, looks at the decking, the flashing, the ventilation, and the underlayment. He’s looking for why the failure happened, not just where.
  3. 3
    You get a written diagnosis and a written price. Before any work starts, we tell you the price. Not a range with “surprises” later. The Kingswell Way is to say the price before the work, and that applies to Tamko repairs, replacements, and inspections.
  4. 4
    We decide on parts together. For Tamko shingle color matching, we work from the Tamko color chart to match your existing shingle line, whether it’s Heritage, Elite, or Titan. If the exact dye lot is unavailable, we’ll show you the closest match before installing anything. For accessories like ridge cap or hip shingles, we use OEM Tamko components where the warranty matters most. For underlayment and fasteners, we use quality equivalents that meet or exceed spec, because those don’t affect the shingle warranty and don’t need a manufacturer stamp.
  5. 5
    We do the work, then we test it. On repair jobs, we test for water intrusion with a controlled hose test on the repaired section. On replacement jobs, we inspect every nailing pattern, every flashing joint, every drip edge seam before we call it done.
  6. 6
    You get a written guarantee before we leave. Every repair carries a written guarantee delivered the day of the job. If it fails inside the guarantee window, we come back at no charge. That’s covered by the 365-Day Done Right Promise, not something you have to negotiate.

What Tamko Roofing Company Costs in Sacramento

Here are honest numbers for the Tamko jobs we run most often in Sacramento:

  • Tamko shingle repair (small, 5 – 10 shingles): $425 – $750
  • Flashing repair or replacement around a chimney or pipe: $550 – $1,200 depending on access and whether the stucco needs patching
  • Ridge cap repair or replacement along hips/peaks: $600 – $1,500 depending on lineal footage
  • Full Tamko reroof (average Sacramento single-story, ~1,800 sq ft roof): $12,500 – $19,000 depending on tear-off requirements, decking replacement, and series (Heritage is the entry point; Titan XT runs higher)
  • Roof inspection with written report: Free with any repair; standalone inspections at a flat rate we give you before we schedule

What moves the price: roof pitch and accessibility, how much decking needs replacement, whether we’re matching a discontinued Tamko color exactly, and how many layers are already on the roof. We show you the line-item breakdown before we start, not after. Call (279) 348-3049 for a free estimate specific to your roof.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Why Sacramento Homeowners Call Tilehurst Roofing Sacramento for Tamko Work

Most of our Sacramento Tamko calls come from homeowners who’ve already been through a bad roofing experience. Maybe the last crew didn’t show. Maybe the price changed at the door. Maybe a repair failed within months and nobody answered when they called back. We built Tilehurst to be the opposite of that experience.

Every job starts with a written price. Every repair comes with a written guarantee before the crew leaves. If that repair fails inside the guarantee period, we come back at no charge. We run background-checked, uniformed technicians on every job, so you always know who’s on your roof. And if Tamko’s not the right material for your repair or replacement in Sacramento’s climate, we’ll tell you that too. We carry GAF, Owens Corning, CertainTeed, IKO, Atlas, and Boral as well, seven manufacturers total, so you get the material that fits your roof, not just whatever’s loaded on the truck that day.

FAQs

Get a Straight Answer About Your Tamko Roof

If your Tamko roof is leaking, shedding granules, lifting in the wind, or just looking tired after years of Sacramento summers, call us. We tell you the price before we touch your roof, every time, no exceptions. You’ll get a written estimate, a straight diagnosis from Greg Holloway, and no pressure.

Call (279) 348-3049 to schedule your free estimate. A live person answers.

Written by Greg Holloway, Owner, Tilehurst Roofing Sacramento at Tilehurst Roofing Sacramento, serving Sacramento and nearby areas.

Need Roofing help in Sacramento? Licensed & insured · Written quotes before work starts response · free estimates
Call (279) 348-3049
Local Service Coverage

Request a Free Estimate in Sacramento

Tell us what you need - Tilehurst Roofing Sacramento responds fast. No obligation.

When you send us your details, you accept our Privacy Policy and authorize us to contact you through phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Text Now
Call Now - 24/7 Dispatch