Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Boral Roof Replacement in Sacramento: What to Know First
Boral roof replacement in Sacramento typically runs $14,000 – $28,000 for a full tear-off on an average single-family home, depending on the specific Boral product, decking condition, and roof pitch. Most Boral jobs take 3 – 6 working days once materials land, and we give you a written price before any work starts, always. If you own a Boral roof, especially an older Boral concrete tile roof from the 1990s or early 2000s, you already know the product holds up against Sacramento heat better than most; the underlayment beneath it rarely does. This page is written for homeowners who need a straight answer on what a Boral replacement actually costs here, what fails first, and how we handle the job without surprises.
As an independent Boral service provider, Tilehurst Roofing Sacramento is not affiliated with or authorized by Boral. We are a Kingswell family roofing company, founded in 2000, and we replace more Boral roofs in Sacramento than most local contractors because homeowners with existing Boral product usually want to stay with it. Call (279) 348-3049 and a live person answers, day or night.
How Boral Products Fail – and How We Fix Them
Boral’s concrete and clay tile lines are genuinely tough roofing materials. The failure usually isn’t the tile itself; it’s what is under it, or what happens when someone worked on the roof without knowing the product. Here are the five failure patterns we see most on Boral roofs in Sacramento, and what we do about each one.
- Boral CedarLite underlayment failure with tile still intact. CedarLite is a lightweight concrete tile that looks like wood shake. The tiles can last 40 – 50 years in Sacramento’s dry climate, but the original 30-lb felt underneath rarely survives past 20. We see hairline underlayment cracks along eaves and valleys that let water through while the tile above looks perfectly fine from the ground. Our fix: a full lift-and-reset. We remove the Boral tile, replace decking where needed, install a modern self-adhered underlayment, and reset the same tile if it is sound. That saves thousands versus buying new Boral tile, and it is the warranty-safe way to do it.
- Boral Villa roof-to-wall flashing separation in older East Sacramento homes. The Boral Villa series is a flat-profile clay tile common on Spanish and Mediterranean-style homes in East Sacramento and Land Park. The tile is excellent; the original step flashing at roof-to-wall intersections is not. Over 20 – 30 years, Sacramento’s summer expansion-and-contraction cycle pulls the flashing loose at the stucco junction. We see water intrusion along exterior walls that looks like a stucco problem but is actually a flashing problem. Our fix is complete flashing replacement with new counter-flashing and sealant rated for clay tile movement, done as part of the full replacement.
- Boral Saxony broken hip and ridge tiles from foot traffic. This is the one we see most after a prior repair from another contractor: broken hip and ridge tiles on Boral Saxony concrete tile roofs because someone walked the hip line without knowing how to distribute weight on a Boral installation. Once those ridge tiles crack, water gets under the cap and into the roof deck. Our techs use proper walk boards and Boral-specific installation patterns. When a hip is already compromised, we replace the ridge cap system, not just patch the broken tile.
- Boral Capistrano valley flashing failures in neighborhoods with mature trees. Boral Capistrano is a smooth-profile clay tile that shows up a lot in older Sacramento neighborhoods with big oak and elm canopies. Leaf and needle buildup in valleys holds moisture against the valley metal long after the rain stops. The original valley flashing corrodes from the underside. Many homeowners call thinking the Boral tile has failed, when the real issue is galvanized valley metal that was under-speced for the debris load. Our replacement includes 24-gauge or heavier valley metal with a wider open valley design that handles Sacramento’s leaf load.
- OEM vs. aftermarket Boral replacement tile color-matching problems. Boral discontinued certain color blends years ago, and if you lost tiles to a wind event or a fallen branch, off-the-shelf patch tiles often do not match. Homeowners end up with a patchwork roof that looks worse than the leak ever did. When we do a full Boral replacement, we match to the current Boral line and color blend, and if a discontinued color is required, we source from reclaimed Boral tile suppliers before the job starts, so the replacement looks like it belongs. That sourcing step is part of our written price, not a surprise add-on.
Styles & brands we work with






Our Boral Roof Replacement Process
When you call Tilehurst Roofing Sacramento about a Boral roof replacement, here is what happens, in order, every time.
- 1
You call (279) 348-3049, a person answers. Not a voicemail, not a callback queue. A live person. We schedule a site visit at a time that works for you, and we show up in the window we gave.
- 2
We walk the roof and inspect what is under the tile. Greg Holloway personally walks every Boral job before a price is mentioned. We check decking condition, underlayment state, flashing integrity, and the condition of the existing Boral tile to determine if it can be reset or needs full replacement.
- 3
We give you a written price before any work starts. That price covers the tear-off, decking replacement where needed, new underlayment, flashing, the Boral tile or reset of existing tile, and cleanup. No price change at the door. No handshake add-ons.
- 4
We order Boral product or source reclaimed tile for discontinued blends. Material lead time is usually 2 – 4 weeks for Boral in Sacramento. We tell you the material ETA before you sign anything. If we are resetting your existing Boral tile, lead time is shorter.
- 5
Our crew does the tear-off, decking repair, underlayment, tile installation, and flashing. We use Boral-specific installation practices, protect your landscaping with tarps and magnet sweeps for nails, and keep the site clean during the job.
- 6
We walk the finished roof with you, then hand you a written guarantee before the crew leaves. The 365-Day Done Right Promise starts that day. If anything is not right inside that year, we come back and fix it at no charge. That is the whole point of the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails.
See the difference
Before
After
Before
After
Before
AfterWhat Boral Roof Replacement Costs in Sacramento
| Scenario | Typical Cost in Sacramento |
|---|---|
| Full tear-off and new Boral concrete tile (average 1,800 – 2,200 sq ft home) | $18,000 – $28,000 |
| Full tear-off and new Boral clay tile (same home size) | $22,000 – $34,000 |
| Lift-and-reset existing Boral tile with new underlayment and flashing | $10,000 – $16,000 |
| Decking replacement (per sheet, if rot found during tear-off) | $75 – $110 per sheet |
| Full underlayment replacement with new valley metal and ridge cap | $6,000 – $9,000 |
What moves the number: roof pitch, number of valleys, decking condition, whether we can reset your existing Boral tile or need new product, and whether any discontinued color blending requires reclaimed tile sourcing. Steep roofs cost more in labor; single-story ranch homes in Carmichael or Fair Oaks typically cost less than two-story homes with cut-up rooflines in East Sacramento. Call (279) 348-3049 and we will give you a written estimate with the exact number for your roof. It is free, and it is the same number whether you sign that day or next month.
Why Sacramento Homeowners Call Tilehurst Roofing Sacramento for Boral Work
Boral roofs are not something you hand to a crew that mostly does asphalt. The tile profiles, the underlayment requirements, the flashing details, and the color-matching realities are different. Our techs know Boral because they have worked on it for years, from CedarLite in Natomas to Capistrano in Land Park to Villa clay tile on the older craftsman streets near McKinley Park. If the job calls for a different material, we are not locked into one manufacturer. We install GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, so the recommendation we give you is the one that fits your roof, not the one that fits our truck. Every job starts with a written price. Every repair and replacement carries the 365-Day Done Right Promise. And a live person answers every call, 24 hours a day, 7 days a week. We tell you the price before we touch your roof, every time, no exceptions.
FAQs
No. Boral tile warranties cover the tile product itself, not the original installation. If your Boral tile is still under manufacturer warranty and we are doing a lift-and-reset or a full replacement with new Boral tile, we document the installation to preserve any remaining product warranty eligibility. As an independent Boral service provider, we do not control Boral’s warranty decisions, but we install to Boral’s published specifications so your product warranty stays intact where it applies. Call (279) 348-3049 if you want us to check your specific Boral warranty status during the estimate.
Most full Boral roof replacements in Sacramento run $18,000 – $34,000 depending on whether you have concrete or clay tile, the size of the home, and the condition of the decking underneath. If your existing Boral tile is still sound, a lift-and-reset with new underlayment and flashing typically costs $10,000 – $16,000. Your written estimate from us includes the exact number, and that number does not change once work starts. Call (279) 348-3049 to schedule a free estimate.
Yes, in most cases. If your Boral tile is intact and the original underlayment has failed, which is very common in Sacramento homes built in the 1990s and early 2000s, we can do a full lift-and-reset. We remove the tile carefully, replace damaged decking, install new underlayment and flashing, and reset the original Boral tile. You keep the tile you already paid for and get another 20 – 30 years out of the roof. The only time that is not advisable is when the Boral tile itself is cracked, spalling, or has widespread breakage.
We source reclaimed Boral tile from suppliers who specialize in discontinued blends, and we do that sourcing before the job starts so you know the color match is available and what it costs. If a good match is not sourceable, we will tell you that in the written estimate and recommend the closest current Boral line or blend. We do not install mismatched patches and call it done. Call (279) 348-3049 and we will check your specific Boral color against current and reclaimed availability.
Most Boral roof replacements take 3 – 6 working days once materials are on site. The bigger variable is material lead time, which runs 2 – 4 weeks for new Boral tile in Sacramento, and longer if you need a discontinued color that requires reclaimed sourcing. We tell you the full timeline, including material ETA, before you sign. A lift-and-reset of existing Boral tile usually completes faster, often in 2 – 4 days.
Written by Greg Holloway, Owner, Tilehurst Roofing Sacramento at Tilehurst Roofing Sacramento, serving Sacramento and nearby areas.